Basit öğe kaydını göster

dc.contributor.authorKarabulut, Ş.
dc.contributor.authorGökmen, U.
dc.contributor.authorKarakoç, H.
dc.contributor.authorHakan, Ö. K.
dc.contributor.authorÇitak, R.
dc.date.accessioned2020-01-29T09:42:29Z
dc.date.available2020-01-29T09:42:29Z
dc.date.issued2016
dc.identifier.urihttps://doi.org/10.15407/mfint.37.09.1239
dc.identifier.urihttps://www.scopus.com/inward/record.url?eid=2-s2.0-85012044112&partnerID=40&md5=3e7cd28c0e105bae20f6d6e05db4e0f5
dc.identifier.urihttp://hdl.handle.net/11655/21907
dc.description.abstractIn the present paper, the influences of cutting parameters on surface roughness in wire electric-discharge machining of (WEDM) process of particle-reinforced aluminium AA6061 alloy composite are investigated. The composites are produced using 15% wt. B4C fraction using powder metallurgy. Experimental trials are performed based on Taguchi L18 (21×32) with a mixed orthogonal array, and the WEDM cutting parameters are optimized for the best surface quality. The investigation results are evaluated by response surface plots and main effect graphs. The machined surface of the metal matrix composite is investigated using scanning electron microscopy (SEM) micrographs. The effect of WEDM machining variables are determined using analysis of variance (ANOVA). The analysis result shows that the most significant cutting parameter is peak current for surface roughness. The SEM and optical micrographs indicate that the reinforced B4C particles are homogeneously distributed in the matrix structure. Mathematical models are also generated using regression analysis for the surface roughness. Confirmation tests are carried out to determine the prediction performance of the mathematical models, and the surface roughness is predicted with an acceptable mean squared error.tr_TR
dc.language.isoentr_TR
dc.publisherG.V. Kurdyumov Institute for Metal Physicstr_TR
dc.relation.isversionof10.15407/mfint.37.09.1239tr_TR
dc.rightsinfo:eu-repo/semantics/openAccesstr_TR
dc.subjectTaguchi methodtr_TR
dc.subjectWire electric discharge machiningtr_TR
dc.subjectSurface roughnesstr_TR
dc.subjectResponse surface methodologytr_TR
dc.subject.lcshMakinetr_TR
dc.titleExperimental Investigation of B4C Particulate Reinforced Aluminium 6061 Based Composite Material in Wire-Cut EDMtr_en
dc.typeinfo:eu-repo/semantics/articletr_TR
dc.typeinfo:eu-repo/semantics/publishedVersion
dc.relation.journalMetallofizika i Noveishie Tekhnologiitr_TR
dc.contributor.departmentMakinetr_TR
dc.identifier.volume37tr_TR
dc.identifier.issue9tr_TR
dc.identifier.startpage1239tr_TR
dc.identifier.endpage1251tr_TR
dc.description.indexScopustr_TR
dc.fundingYoktr_TR


Bu öğenin dosyaları:

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster