Browsing Restoratif Diş Tedavisi Bölümü Makale Koleksiyonu by Title
Now showing items 1-20 of 39
-
A Comparative Study on Monomer Elution and Cytotoxicity of Different Adhesive Restoration Materials
(Taylor & Francis Ltd, 2017)This study evaluated monomer release and cytotoxicity of different adhesive restoration materials used for dental restorations. The extracts (1, 2, and 7days) of three types of adhesive dental restoration materials, [Quixfill ... -
Assessment Of Diagnostic Doses For Widely Used Synthetic Pyrethroids (Deltamethrin & Permethrin) In An Endemic Focus Of Leishmaniasis In Turkey
(2016)Background Leishmania is a group of parasitic flagellated protozoons, which are transmitted by female sand flies and produces health problems in humans and also in wild and domestic animals. So far, 25 Phlebotomus and 4 ... -
Bond Strength of Dental Nanocomposites Repaired with a Bulkfill Composite
(2017)Background The aim of this study was to analyze the bond strength of aged resin based nanocomposites repaired with the same and bulk fill composites. Material and Methods Seventy-two disc shaped resin composites consisted ... -
Bond Strength of Different Adhesive Systems to Dental Hard Tissues
(Operative Dentistry Inc, 2007)This study compared the shear bond strengths of different adhesive systems to enamel and dentin of different depths. The adhesive systems used were: Single Bond one-bottle total-etch; AQ Bond one-step self-etching, Clearfil ... -
Bond Strength Of One-Step Self-Etch Adhesives And Their Predecessors To Ground Versus Unground Enamel
(2012)Objective The aim of this study was to compare the shear bond strength of several self-etch adhesives to their two-step predecessors to ground and unground enamel. Methods: Seventy-five extracted, non-carious human third ... -
Bond Strength of Orthodontic Brackets Bonded to Enamel with a Self-Etching Primer After Bleaching and Desensitizer Application
(Korean Assoc Orthodontists, 2010)Objective: The aim of this study was to compare the shear bond strengths (SBS) of orthodontic brackets bonded to enamel with a self-etching primer after bleaching, desensitizer application and combined treatment. Methods: ... -
Chairside Restorations Of Maxillary Anterior Teeth With Cad/Cam Porcelain Laminate Veneers Produced By Digital Workflow: A Case Report With A Step To Facilitate Restoration Design
(2019)Since the introduction of porcelain laminate veneers in the early 1980s, the anterior esthetic rehabilitation with PLVs has been provided with a conventional restorative technique for many years. Recently, a new concept ... -
Clinical Performance And Epidemiologic Aspects Of Fractured Anterior Teeth Restored With A Composite Resin: A Two-Year Clinical Study
(2019)Purpose To investigate the etiologic factors, effect of age and gender on dental trauma, and to evaluate the performance of composite resin on the fractured crown of permanent anterior teeth. Materials and Methods Over a ... -
Color Stability Of Bulk-Fill And Incremental-Fill Resin-Based Composites Polished With Aluminum-Oxide Impregnated Disks
(2017)Objectives This study aimed to evaluate the color stability of bulk-fill and nanohybrid resin-based composites polished with 3 different, multistep, aluminum-oxide impregnated finishing and polishing disks. Materials and ... -
Comparative Evaluation Of Marginal Adaptation And Fracture Strength Of Different Ceramic Inlays Produced By Cerec Omnicam And Heat-Pressed Technique
(2018)Objective The aim of this in vitro study was to evaluate marginal adaptation and fracture strength of inlays produced by CEREC Omnicam using different types of blocs and heat-pressed technique. Methods: Seventy-five ... -
Comparison Of Acid Versus Laser Etching On The Clinical Performance Of A Fissure Sealant: 24-Month Results
(Operative Dentistry Inc, 2013)Objective: To compare the clinical performance of a pit and fissure sealant placed with the use of different enamel preparation methods, i.e. acid or Er,Cr:YSGG laser etching, over 24 months. Methods: Sixteen subjects (15 ... -
Comparison Of Two Different Methods Of Detecting Residual Caries
(2017)Objectives The aim of this study was to investigate the ability of the fluorescence-aided caries excavation (FACE) device to detect residual caries by comparing conventional methods in vivo. Materials and Methods A total ... -
Compressive Strength Of New Glass Ionomer Cement Technology Based Restorative Materials After Thermocycling And Cyclic Loading
(2019)Objective The objective of the study was to compare compressive strengths of two glass ionomer-based materials, with and without a light-cured, nano-filled coating, after cyclic loading and thermocycling. Materials and ... -
Cuspal Deflection In Premolar Teeth Restored Using Current Composite Resins With And Without Resin-Modified Glass Lonomer Liner
(Operative Dentistry Inc, 2013)Aim: To evaluate the effects of four different types of composite resins and a resin modified glass ionomer cement (RMGIC) liner on the cuspal deflection of large MOD cavities in vitro. Materials & Methods: One hundred ... -
Effect of One-Step Polishing Systems on Surface Roughness of Different Flowable Restorative Materials
(Japanese Soc Dental Materials Devices, 2008)The purpose of this study was to investigate the influence of one-step polishing systems oil the surface roughness of different flowable composites and a microhybrid composite. A total of 120 disks were fabricated and ... -
Effect of Operator Variability on Microleakage With Different Adhesive Systems
(2013)Objective: The objective of this study was to evaluate the effect of operator variability on microleakage with different adhesive systems. Materials and Methods: A total of 180 standardized Class V cavities were prepared ... -
Effect Of Resealing On Microleakage Of Resin Composite Restorations In Relationship To Margin Design And Composite Type
(2012)Objective: To determine the relationship between margin preparation design and resin-composite type on microleakage with or without re-application of surface-penetrating sealant. Methods: Class-I resin-composite restorations ... -
Effect Of Various Bleaching Treatments On Shear Bond Strength Of Different Universal Adhesives And Application Modes
(2018)Objectives The aim of this in vitro study was to evaluate the bond strength of 2 universal adhesives used in different application modes to bleached enamel. Materials and Methods Extracted 160 sound human incisors were ...
