Basit öğe kaydını göster

dc.contributor.advisorTuncel, Süleyman Ali
dc.contributor.authorDurdu Aydın, Aysun
dc.date.accessioned2020-12-14T11:26:50Z
dc.date.issued2020-09
dc.date.submitted2020-09-08
dc.identifier.urihttp://hdl.handle.net/11655/23177
dc.description.abstractWithin the scope of the thesis, development of particle-shaped titanium-based sorbents for lithium recovery and preconcentration has been studied. For this purpose, it is aimed to use Ti(OH)4–polymer composite microspheres, synthesized by a newly developed sol-gel templating method, in the sorbent synthesis. Ti(OH)4–polymer composite microspheres were reacted with both Li2CO3 and LiOH compounds at 700°C for 5 hours to synthesize Li2TiO3 precursor. The resulting dilithium titanate precursor has a spherical form and a porous structure. H2TiO3 ion sieve (sorbent) was obtained by treating Li2TiO3 particles with a solution of HCl at 70°C. Li+ recovery of these sorbents from the aqueous solution medium with porous spherical adsorbent, which is not available in the literature, was investigated in batch system. In adsorption experiments, the effect of sorbent concentration, Li initial concentration in the medium and the change in ambient pH value on equilibrium Li adsorption of the sorbent used was investigated. Eti Mine Works General Directorate Kırka Boron Operation Directorate Factory Weak solution was used as adsorption medium containing lithium, different from the literature. Sorbent adsorbed only B and Na ions from ions such as B, Na, Mg, Ca and K, found in media other than lithium. iv The separation coefficients (α) of B and Na ions relative to Li ion were calculated as 3.6 and 12, respectively. The reusability of the prepared sorbent was studied and it was observed that the amount of 17.15 mg Li+/ g particle adsorption has decreased to 14 mg Li+/g particle adsorption as a result of 5 consecutive usage. While the initial lithium concentration of the synthesized ion sieve was in the range of 70-1700 mg/l, the amount of lithium adsorption was followed and it was found that the adsorption value at the concentration of 1700 mg/l was 92.59 mg Li+/g particles. The prepared titanium-based sorbent was compared with materials of similar form used in the literature.tr_TR
dc.language.isoturtr_TR
dc.publisherFen Bilimleri Enstitüsütr_TR
dc.rightsinfo:eu-repo/semantics/openAccesstr_TR
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/us/*
dc.subjectLityumtr_TR
dc.subjectAdsorbenttr_TR
dc.subjectAdsorpsiyontr_TR
dc.subjectDesorpsiyontr_TR
dc.subjectTitanyum dioksittr_TR
dc.subjectDilityum titanat.mtr_TR
dc.subject.lcshMühendisliktr_TR
dc.titleLityum Kazanımı ve Ön-Deriştirme İşlemleri için Partikül Formunda Sorbentlerin Geliştirilmesitr_TR
dc.title.alternativeDevelopment of Partıculate Sorbents for Lıthıum Recovery and Preconcentratıon
dc.typeinfo:eu-repo/semantics/doctoralThesistr_TR
dc.description.ozetTez çalışmasında lityum kazanımı ve ön-deriştirme işlemleri için partikül formunda titanyum bazlı sorbentlerin geliştirilmesi incelenmiştir. Bu amaçla, yeni geliştirilen sol-jel kalıplama yöntemi ile elde edilen Ti(OH)4–polimer kompozit mikrokürelerin sorbent sentezinde çıkış materyali olarak kullanılması hedeflenmiştir. Ti(OH)4–polimer kompozit mikroküreler ile hem LiOH hem de Li2CO3 kullanılarak 700°C sıcaklıkta 5 saat süreyle Li2TiO3 öncülü sentezlenmiştir. Elde edilen dilityum titanat öncülü küresel formda ve gözenekli yapıdadır. Li2TiO3 partiküllerinin 70°C’de HCl çözeltisiyle etkileştirilmesi ile H2TiO3 iyon eleği (adsorbent) elde edilmiştir. Literatürde olmayan gözenekli küresel formda adsorbent ile sulu çözelti ortamından Li kazanımı kesikli sistemde incelenmiştir. Adsorpsiyon deneylerinde, sorbent derişimi, ortamdaki Li başlangıç derişimi ve ortam pH değerindeki değişimin, kullanılan sorbentin denge Li adsorpsiyonuna etkisi incelenmiştir. Eti Maden İşletmeleri Genel Müdürlüğü Kırka Bor İşletme Müdürlüğü Fabrika Zayıf çözeltisi, literatürden farklı bir şekilde, lityum içeren adsorpsiyon ortamı olarak kullanılmıştır. Adsorbentin lityum dışında ortamda bulunan B, Na, Mg, Ca ve K gibi ii iyonlardan sadece B ve Na iyonlarını adsorpladığı görülmüştür. B ve Na iyonlarının Li+ iyonuna oranla ayırma katsayıları(α), sırasıyla, 3.6 ve 12 olarak hesaplanmıştır. Adsorbentin tekrar tekrar kullanılabilirliği çalışılmış ve 5 defa üst üste kullanımı sonucunda 17.15 mg Li+/g partikül olan denge adsorpsiyonunun, 14 mg Li+/g partikül değerine düştüğü görülmüştür. Sentezlenen iyon eleğin başlangıç lityum derişimi 70-1700 mg/l aralığında lityum adsorpsiyon kapasitesi belirlenmiş ve 1700 mg/l derişimindeki adsorpsiyon değerinin 92.59 mg Li+/g partikül olduğu görülmüştür. Titanyum bazlı adsorbentin literatürde kullanılmış olan benzer formdaki malzemeler ile kıyaslaması yapılmıştır.tr_TR
dc.contributor.departmentKimya Mühendisliğitr_TR
dc.embargo.termsAcik erisimtr_TR
dc.embargo.lift2020-12-14T11:26:50Z
dc.fundingYoktr_TR


Bu öğenin dosyaları:

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster

info:eu-repo/semantics/openAccess
Aksi belirtilmediği sürece bu öğenin lisansı: info:eu-repo/semantics/openAccess