Erişim Hakları "info:eu-repo/semantics/openAccess" Protetik Diş Tedavisi Bölümü için listeleme
Toplam kayıt 65, listelenen: 21-40
-
Effect of Mixing Techniques on Bacterial Attachment and Disinfection Time of Polyether Impression Material
(2013)Objective: The aim of this study was 2-fold. The first aim was to evaluate the effects of mixing technique (hand-mixing or auto-mixing) on bacterial attachment to polyether impression materials. The second aim was to ... -
Efficiency Of Pivot Splints As Jaw Exercise Apparatus In Combination With Stabilization Splints In Anterior Disc Displacement Without Reduction: A Retrospective Study
(2014)Objective To evaluate efficiency of pivot splints in jaw exercises, in combination with stabilization splints, in cases of anterior disc displacement without reduction of temporomandibular joint. Subjects and methods ... -
Ekstraoral İmplantlarda Yeni Anti-Manyetik Dayanak Tasarımının Tutuculuğa Etkisinin İn-Vitro İncelenmesi
(Sağlık Bilimleri Enstitüsü, 2021)Magnet attachments are widely used in maxillofacial prostheses. In addition to many advantages of magnet attachments, there are also disadvantages such as the need to remove the magnetic abutments during the magnetic ... -
Evaluation Of Low-Level Laser Therapy In Tmd Patients
(2015)Light amplification by stimulated emission of radiation (laser) is one of the most recent treatment modalities in dentistry. Low-level laser therapy (LLLT) is suggested to have biostimulating and analgesic effects through ... -
Evaluation Of Mechanical Properties Of Various Nanofibre Reinforced Bis-Gma/Tegdma Based Dental Composite Resins
(Univ West Indies Faculty Medical Sciences, 2018)Objective: To investigate the mechanical properties of various mass fractions of Nylon 6 (N6), polymethyl-metacrylate (PMMA) and polyvinylidene-difluoride (PVDF) nanofibres reinforced bisphenol A-glycidyl methacrylate ... -
FARKLI TARAMA YÖNTEMLERİNİN DİJİTAL ÖLÇÜ DOĞRULUĞUNA ETKİSİ: İN VİTRO ÇALIŞMA
(Sağlık Bilimleri Enstitüsü, 2023-10-20)The aim of this study is to examine the effect of different scanning procedures on digital impression truness. For this purpose, a typodont model was used in which the maxiallary right first molar and left second premolar ... -
FARKLI ÜRETİM TEKNİKLERİYLE ÜRETİLEN PROTEZ KAİDE MATERYALLERİNDEN SALINAN REZİDÜEL MONOMER MİKTARININ KARŞILAŞTIRILMASI
(Sağlık Bilimleri Enstitüsü, 2022)TEZCAN M. Comparison of the Amount of Residual Monomer Released from Denture Base Produced with Different Production Techniques Hacettepe University, Faculty of Dentistry, Thesis in Prosthodontics, Ankara, 2022. The use ... -
Farklı CAD/CAM Seramik Materyallerin Yüzey Özellikleri ve Renklenmelerinin In-vitro İncelenmesi
(Sağlık Bilimleri Enstitüsü, 2021-06-07)This in-vitro study aims to evaluate the surface roughness and coloration of four different CAD/CAM ceramic materials applied with different finishing and polishing sets. In this study, the surface roughness of IPS e. Max ... -
Farklı Marka ve Kalınlıktaki Monolitik Zirkonya Materyalleri Kullanılarak Üretilmiş İnley Destekli Köprülerin Kırılma Direncinin İn Vitro Olarak İncelenmesi
(Sağlık Bilimleri Enstitüsü, 2018)Agar B, An Evaluation of Fracture Resistance of Monolithic Inlay-Retained Zirconia Fixed Bridges Constructed with Different Brands and in Different Thicknesses in Vitro, Hacettepe University Graduate School of Health ... -
Farklı Ölçü Yöntemlerinin Maksiller Tam Protezlerin Tutuculuklarına Etkisinin Kalitatif ve Kantitatif Olarak Değerlendirilmesi
(Sağlık Bilimleri Enstitüsü, 2020)YORUKOGLU İ, Effect of impression technique aplied for maxillary complete dentures on retention: Qualitative and quantitative evaluation. Hacettepe University Faculty of Dentistry, Thesis in Prosthodontics, Ankara, 2020. ... -
Farklı Protez Temizleme Solüsyonları ile Muamele Edilen Akrilik Kaide Materyallerinin Renk Stabilitelerinin Karşılaştırılması
(Sağlık Bilimleri Enstitüsü, 2017)Removable partial or full dentures have been used for many years for the rehabilitation of edentulous patients. Color stability is an important measurement to consider for long-term protection of the aesthetic of the ... -
Ferrule Varlığının ve Yokluğunun; Farklı Endokron ve Estetik Post-Kor Restorasyonların Kırılma Dayanıklılığına Etkisinin, İn Vitro Olarak Karşılaştırılması
(Sağlık Bilimleri Enstitüsü, 2017)AKSU, İ. The effect of ferrule presence on the fracture strength of different endocrown types and esthetic post-core restorations – An in vitro study. Hacettepe University Institute of Health Sciences, Ph.D. Thesis in ... -
Forced Eruption And Implant Site Development In The Aesthetic Zone: A Case Report
(2014)A multidisciplinary approach to develop the future implant site in the aesthetic zone was illustrated. A patient with perio-endo combined lesion at her upper central incisors was treated. Before extraction, forced eruption ... -
Gingival Porselenlerin Renk Değişiminin ve Yüzey Özelliklerinin in Vitro Olarak Değerlendirilmesi
(Sosyal Bilimler Enstitüsü, 2021)The aim of this in vitro study was to evaluate the effect of thermocycling on the color stability, translucency and surface roughness of two different gingival porcelain materials. Two gingival porcelains IPS e.max® Ceram ... -
HEX VE NON-HEX TİTANYUM TABAN DAYANAKLAR ÜZERİNE ÜRETİLEN ÇOK ÜNİTELİ MONOLİTİK ZİRKON KÖPRÜLERDE KUVVET DAĞILIMININ SONLU ELEMANLAR STRES ANALİZİ İLE KARŞILAŞTIRILMASI
(Sağlık Bilimleri Enstitüsü, 2022)SAKAR D., Comparison of Force Distribution with Finite Element Stress Analysis in Multi-Unit Monolithic Zircon Bridges Fabricated on Hex and Non-hex Titanium-Base Abutment. Hacettepe Üniversitesi, Diş Hekimliği Fakültesi, ... -
Immediate Versus Conventional Loading Of Implant-Supported Maxillary Overdentures: A Finite Element Stress Analysis
(Quintessence Publishing Co Inc, 2013)Purpose: To compare biomechanical outcomes of immediately and conventionally loaded bar-retained implant-supported maxillary overdentures using finite element stress analysis. Materials and Methods: Finite element models ... -
In Vitro Evaluation Of The Fracture Strength Of All-Ceramic Core Materials On Zirconium Posts
(2013)Objective: For most endodontically treated teeth, tooth-colored post-core systems are preferable for esthetic reasons. Therefore, improvements in material strength must also consider tooth colored post-core complexes. The ... -
In Vitro Permeability Of Etch-And-Rinse And Self-Etch Adhesives Used For Immediate Dentin Sealing
(Japanese Soc Dental Materials Devices, 2012)To investigate the permeability of deep dentin following immediate sealing with different etch-and-rinse and self-etch adhesives (Single Bond 2, Adper Prompt L-Pop, Clearfil Protect Bond, Clearfil S3 Bond, G-Bond) and a ...