Browsing Protetik Diş Tedavisi Bölümü by Title
Now showing items 30-49 of 86
-
Evaluation Of Low-Level Laser Therapy In Tmd Patients
(2015)Light amplification by stimulated emission of radiation (laser) is one of the most recent treatment modalities in dentistry. Low-level laser therapy (LLLT) is suggested to have biostimulating and analgesic effects through ... -
Evaluation Of Mechanical Properties Of Various Nanofibre Reinforced Bis-Gma/Tegdma Based Dental Composite Resins
(Univ West Indies Faculty Medical Sciences, 2018)Objective: To investigate the mechanical properties of various mass fractions of Nylon 6 (N6), polymethyl-metacrylate (PMMA) and polyvinylidene-difluoride (PVDF) nanofibres reinforced bisphenol A-glycidyl methacrylate ... -
FARKLI AÇILANMALARA SAHİP İMPLANT TARAMA GÖVDELERİNE YAPILAN MODİFİKASYONLARIN FARKLI YAZILIMLAR KULLANILARAK EŞLENMESİNİN DİJİTAL ÖLÇÜ DOĞRULUĞUNA ETKİSİ : İN VİTRO ÇALIŞMA
(Sağlık Bilimleri Enstitüsü, 2024)BİLGİN D. The Effect Of Matching Different Angulated and Modified Scanbodies On Digital Impression Accuracy Using Different Software: An In Vitro Study, Hacettepe University, Faculty of Dentistry, Speciality Thesis in ... -
FARKLI BAŞ POSTÜRLERİNDE İNTEROKLUZAL TEMAS NOKTALARINDAKİ DEĞİŞİMİN DİJİTAL OLARAK DEĞERLENDİRİLMESİ
(Sağlık Bilimleri Enstitüsü, 2023)KARACA S, Digital Evaluation of the Change in Interocclusal Contact Points in Different Head Postures. Hacettepe University, Faculty of Dentistry. Speciality Thesis in Prosthodontics, 2023. There is knowledge that different ... -
FARKLI TARAMA YÖNTEMLERİNİN DİJİTAL ÖLÇÜ DOĞRULUĞUNA ETKİSİ: İN VİTRO ÇALIŞMA
(Sağlık Bilimleri Enstitüsü, 2023-10-20)The aim of this study is to examine the effect of different scanning procedures on digital impression truness. For this purpose, a typodont model was used in which the maxiallary right first molar and left second premolar ... -
FARKLI ÜRETİM TEKNİKLERİYLE ÜRETİLEN PROTEZ KAİDE MATERYALLERİNDEN SALINAN REZİDÜEL MONOMER MİKTARININ KARŞILAŞTIRILMASI
(Sağlık Bilimleri Enstitüsü, 2022)TEZCAN M. Comparison of the Amount of Residual Monomer Released from Denture Base Produced with Different Production Techniques Hacettepe University, Faculty of Dentistry, Thesis in Prosthodontics, Ankara, 2022. The use ... -
Farklı CAD/CAM Seramik Materyallerin Yüzey Özellikleri ve Renklenmelerinin In-vitro İncelenmesi
(Sağlık Bilimleri Enstitüsü, 2021-06-07)This in-vitro study aims to evaluate the surface roughness and coloration of four different CAD/CAM ceramic materials applied with different finishing and polishing sets. In this study, the surface roughness of IPS e. Max ... -
Farklı Kalınlıklardaki CAD/CAM Zirkonya, Hibrit Seramik ve Rezin Nano-Seramik Onleylerin Kırılma Dayanıklılıklarının In-Vitro Olarak Karşılaştırılması
(Sağlık Bilimleri Enstitüsü, 2016-12-14)Zirconia has been used in esthetic cases often. Because of its brittleness new materials are developed like hybrid ceramic and resin nano ceramic. The aim of this study was to assess and compare the fracture ... -
Farklı Marka ve Kalınlıktaki Monolitik Zirkonya Materyalleri Kullanılarak Üretilmiş İnley Destekli Köprülerin Kırılma Direncinin İn Vitro Olarak İncelenmesi
(Sağlık Bilimleri Enstitüsü, 2018)Agar B, An Evaluation of Fracture Resistance of Monolithic Inlay-Retained Zirconia Fixed Bridges Constructed with Different Brands and in Different Thicknesses in Vitro, Hacettepe University Graduate School of Health ... -
Farklı Ölçü Yöntemlerinin Maksiller Tam Protezlerin Tutuculuklarına Etkisinin Kalitatif ve Kantitatif Olarak Değerlendirilmesi
(Sağlık Bilimleri Enstitüsü, 2020)YORUKOGLU İ, Effect of impression technique aplied for maxillary complete dentures on retention: Qualitative and quantitative evaluation. Hacettepe University Faculty of Dentistry, Thesis in Prosthodontics, Ankara, 2020. ... -
Farklı Protez Temizleme Solüsyonları ile Muamele Edilen Akrilik Kaide Materyallerinin Renk Stabilitelerinin Karşılaştırılması
(Sağlık Bilimleri Enstitüsü, 2017)Removable partial or full dentures have been used for many years for the rehabilitation of edentulous patients. Color stability is an important measurement to consider for long-term protection of the aesthetic of the ... -
Farklı Üretim Tekniği ve Materyaller Kullanılarak Üretilen Estetik Post-Kor Sistemlerinin Kırılma Dayanıklılığının iIn Vitro Olarak İncelenmesi
(Sağlık Bilimleri Enstitüsü, 2013)The choice of an appropriate restoration for endodontically treated anterior teeth is guided by strength and esthetics. Ceramic posts and cores present an esthetic option as foundation restorations for ceramic crowns. The ... -
Ferrule Varlığının ve Yokluğunun; Farklı Endokron ve Estetik Post-Kor Restorasyonların Kırılma Dayanıklılığına Etkisinin, İn Vitro Olarak Karşılaştırılması
(Sağlık Bilimleri Enstitüsü, 2017)AKSU, İ. The effect of ferrule presence on the fracture strength of different endocrown types and esthetic post-core restorations – An in vitro study. Hacettepe University Institute of Health Sciences, Ph.D. Thesis in ... -
Forced Eruption And Implant Site Development In The Aesthetic Zone: A Case Report
(2014)A multidisciplinary approach to develop the future implant site in the aesthetic zone was illustrated. A patient with perio-endo combined lesion at her upper central incisors was treated. Before extraction, forced eruption ... -
Gingival Porselenlerin Renk Değişiminin ve Yüzey Özelliklerinin in Vitro Olarak Değerlendirilmesi
(Sosyal Bilimler Enstitüsü, 2021)The aim of this in vitro study was to evaluate the effect of thermocycling on the color stability, translucency and surface roughness of two different gingival porcelain materials. Two gingival porcelains IPS e.max® Ceram ... -
HEX VE NON-HEX TİTANYUM TABAN DAYANAKLAR ÜZERİNE ÜRETİLEN ÇOK ÜNİTELİ MONOLİTİK ZİRKON KÖPRÜLERDE KUVVET DAĞILIMININ SONLU ELEMANLAR STRES ANALİZİ İLE KARŞILAŞTIRILMASI
(Sağlık Bilimleri Enstitüsü, 2022)SAKAR D., Comparison of Force Distribution with Finite Element Stress Analysis in Multi-Unit Monolithic Zircon Bridges Fabricated on Hex and Non-hex Titanium-Base Abutment. Hacettepe Üniversitesi, Diş Hekimliği Fakültesi, ... -
Immediate Versus Conventional Loading Of Implant-Supported Maxillary Overdentures: A Finite Element Stress Analysis
(Quintessence Publishing Co Inc, 2013)Purpose: To compare biomechanical outcomes of immediately and conventionally loaded bar-retained implant-supported maxillary overdentures using finite element stress analysis. Materials and Methods: Finite element models ... -
In Vitro Evaluation Of The Fracture Strength Of All-Ceramic Core Materials On Zirconium Posts
(2013)Objective: For most endodontically treated teeth, tooth-colored post-core systems are preferable for esthetic reasons. Therefore, improvements in material strength must also consider tooth colored post-core complexes. The ... -
In Vitro Permeability Of Etch-And-Rinse And Self-Etch Adhesives Used For Immediate Dentin Sealing
(Japanese Soc Dental Materials Devices, 2012)To investigate the permeability of deep dentin following immediate sealing with different etch-and-rinse and self-etch adhesives (Single Bond 2, Adper Prompt L-Pop, Clearfil Protect Bond, Clearfil S3 Bond, G-Bond) and a ...