dc.contributor.advisor | Ersu, Bahadır | |
dc.contributor.author | Sözen Yanık, İrem | |
dc.date.accessioned | 2021-05-28T13:29:31Z | |
dc.date.issued | 2021 | |
dc.date.submitted | 2021-03-01 | |
dc.identifier.uri | http://hdl.handle.net/11655/23701 | |
dc.description.abstract | Magnet attachments are widely used in maxillofacial prostheses. In addition to many advantages of magnet attachments, there are also disadvantages such as the need to remove the magnetic abutments during the magnetic resonance imaging (MRI) and their negative effects on cells. This in-vitro study aims to evaluate the retention of new types of anti-magnetic abutment designs developed as an alternative to routinely used magnetic abutments. For this purpose, the retention of the new type of anti-magnetic abutments produced from Ti6Al4V alloy were compared to the extraoral implants currently in use. 4 groups were determined in the study and 10 samples were prepared for each group. 1st group is conventional magnetic system (GMS-control group), 2nd group conventional magnetic system heated at 100 ° C (IGMS), 3rd group anti-magnetic abutment type 1 system (AMS1) and 4th group anti-magnetic abutment type 2 system (AMS2). The samples were placed in the test system, after the test system was prepared. The dislodging forces were measured at cycles 0, 120, 360, 720, 1440. The retention values were measured as GMS: 3.39 N, IGMS: 3.38 N, AMS1: 8.83 N, AMS2: 8.75 N at the end of 1440 cycles, respectively. Two way ANOVA repeated measures were used to evaluate the results and compare the extraction forces of different abutment-attachment systems. AMS groups and GMS groups showed similar results within themselves (p> 0.05). A statistically significant difference was found between GMS and AMS1, GMS and AMS2 (p <0.05). As a result, it has been observed that the retention strength of the new type of anti-magnetic abutments has higher values and can be an alternative to magnetic abutments. | tr_TR |
dc.language.iso | tur | tr_TR |
dc.publisher | Sağlık Bilimleri Enstitüsü | tr_TR |
dc.rights | info:eu-repo/semantics/openAccess | tr_TR |
dc.subject | Çene-yüz protezleri | tr_TR |
dc.subject | Ekstraoral implant | tr_TR |
dc.subject | Anti-manyetik dayanak | tr_TR |
dc.title | Ekstraoral İmplantlarda Yeni Anti-Manyetik Dayanak Tasarımının Tutuculuğa Etkisinin İn-Vitro İncelenmesi | tr_TR |
dc.type | info:eu-repo/semantics/masterThesis | tr_TR |
dc.description.ozet | Mıknatıs ataçmanlar, maksillofasiyal protezlerde yaygın olarak kullanılmaktadır. Mıknatıs tutucuların pek çok avantajının yanı sıra, manyetik dayanakların, manyetik rezonans görüntülemede (MRG) çıkarılmasının gerekliliği ve hücreler üzerindeki olumsuz etkileri gibi dezavantajları da vardır. Bu in-vitro çalışmanın amacı, rutinde kullanılan manyetik dayanaklara alternatif olarak geliştirilmiş yeni tip anti-manyetik dayanak tasarımların tutuculuğunu değerlendirmektir. Bu amaçla Ti6Al4V alaşımından üretilen yeni tip anti-manyetik dayanakların, güncel kullanımda olan ekstraoral implantlara göre, tutuculukları karşılaştırılmıştır. Çalışmada 4 grup belirlenmiştir ve her gruptan 10’ar örnek hazırlanmıştır. 1. grup geleneksel manyetik sistem (GMS-kontrol grubu), 2. grup bu geleneksel manyetik sistemin 100°C’de ısıtılmış hali (IGMS), 3. grup anti-manyetik dayanak tip 1 sistemi (AMS1) ve 4. grup da tip 2 sistemidir (AMS2). Örnekler, test sistemi hazırlandıktan sonra sırasıyla test sistemine yerleştirilmiştir. 0, 120, 360, 720, 1440. döngülerdeki tutuculuk kuvvetleri ölçülmüştür. Tutuculuk değerleri 1440 döngü sonucunda sırası ile GMS: 3,39 N, IGMS: 3,38 N, AMS1: 8,83 N, AMS2: 8,75 N olarak ölçülmüştür. Sonuçların değerlendirilmesi ve farklı dayanak-ataçman sistemlerinin çıkarma kuvvetlerinin karşılaştırılmasında Two way ANOVA repeated measures kullanılmıştır. AMS grupları kendi içinde ve GMS grupları kendi içinde benzer sonuçlar göstermiştir (p>0,05). GMS ve AMS1, GMS ve AMS2 arasında ise istatistikler olarak anlamlı farklılık bulunmuştur (p<0,05). Sonuç olarak, yeni tip anti-manyetik dayanakların tutuculuk kuvvetlerinin daha yüksek değerlerde olduğu ve manyetik dayanaklara bir alternatif olabileceği görülmüştür. | tr_TR |
dc.contributor.department | Protetik Diş Tedavisi | tr_TR |
dc.embargo.terms | 2 yil | tr_TR |
dc.embargo.lift | 2023-05-30T13:29:32Z | |
dc.funding | Yok | tr_TR |
dc.subtype | dentThesis | tr_TR |