Ara
Toplam kayıt 8, listelenen: 1-8
EXPERIMENTAL AND THEORETICAL FATIGUE ANALYSIS OF AVIONIC UNIT MOUNTING BRACKETS INTEGRATED ON AN UNMANNED AERIAL VEHICLE UNDER RANDOM VIBRATION ENVIRONMENT
(Fen Bilimleri Enstitüsü, 2021-06)
In air platforms, structures encountered many types of loadings. During the design stage, all these loadings have to be considered very carefully in order to avoid catastrophic failures. One of the major concerns for ...
Investıgatıon of Effects of Bırd Strıke on A Rotary-Wıng Aırcraft
(Fen Bilimleri Enstitüsü, 2021)
Bird strike incidents have been important issue since begining of aviation, and importance of bird strikes increase day by day. Number of bird strike incident are going to continue increasing because of developing aviation ...
Fıxed Wıng Uav Target Geolocatıon Estımatıon From Camera Images
(Fen Bilimleri Enstitüsü, 2021)
In this thesis, a target geolocation measurement model for a fixed wing unmanned aerial vehicle which equipped with an image processing system and standard sensors has been created. The measurement model begins to calculate ...
Development of a Flight Envelope Protection System For a Helicopter in Autorotation
(Fen Bilimleri Enstitüsü, 2021-02)
In this thesis, a flight envelope protection system was developed for a helicopter in
autorotation to prevent main rotor speed limit exceedance. A rotor speed estimation
model was developed using a neural network based ...
Experımental Analysıs and Fınıte Element Modellıng of Mechanıcal Stoppers Under Impact Loadıng
(Fen Bilimleri Enstitüsü, 2021)
The aim of this thesis is to determine and understand the characteristic of impact loading and reaction of different materials colliding to each other. In engineering area, especially for moving mechanisms, such designs ...
Topology Optimization of Slider-Crank Mechanism Under Dynamic Loading
(Fen Bilimleri Enstitüsü, 2021)
Parts in the mechanical system can be optimized individually regarding the static or modal
analysis. However, during the motion of an assembly, parts move together and applied forces
and configuration of assembly changes ...
Yaw Dynamics Control of Three Wheeled Hybrid Vehicle by Torque Vectoring
(Fen Bilimleri Enstitüsü, 2021)
In this thesis, the lateral dynamics of the three-wheeled hybrid vehicle were evaluated. Mechanical components and moving parts such as the vehicle chassis, suspensions, steering system, and tires are modeled on Adams/Car ...
Improvement of Interfacıal Toughness of Layered Composıtes By Usıng Electrostatıc Flockıng Technıque
(Fen Bilimleri Enstitüsü, 2021)
Fiber-reinforced composites have remarkable strength to weight ratio. Hence, their areas of usage are increasing. Solving the delamination problem that affects service life of layered composites has gained importance. As ...