Search
Now showing items 1-10 of 11
Estimation Of Stress Intensity Factors For Cracked Finite Plates Using A Hybrid Model Of Artificial Neural Network And Finite Element Method (Ansys)
(Fen Bilimleri Enstitüsü, 2019)
The aim of this study was to develop an artificial neural network model in order to estimate stress intensity factor values of two different types of semi elliptical surface cracked plates which have no explicit stress ...
Hu-Go Hafif Aracının Şasisinin Sonlu Elemanlar Metodu ile Mukavemet ve Modal Analizi
(Fen Bilimleri Enstitüsü, 2012)
Loads are occured on the vehicles by the road conditions, their velocities, the
curve that they take etc. These loads cause to create stresses on the vehicle
chassis. Because of these stresses some problems can occur on ...
Design and Manufacturing of a New Type Monorail Crane, Moving on Both Hoiızontal and Angular Rails Also Climbing on Vertıcal Rails, by Using Finite Element Analysis
(Fen Bilimleri Enstitüsü, 2014)
This study has been prepared in cooperation University and Industry, 1505, with
the support of TUBITAK. The reason why this project is needed, because buildings
having curvilinear geometries is required to design a ...
Fatigue and Crack Propagation Analysis of a 11000 Shp Turboprop Engine Front Bearing Structure and Validation
(Fen Bilimleri Enstitüsü, 2015)
All the components on a gas turbine should meet the requirements defined by the responsible associations. The front bearing structure which is assigned to be on the main load path of the engine has low cycle fatigue ...
Malzeme Özellikleri Sıcaklığa Bağımlı Olan Izotropik Fonksiyonel Derecelendirilmiş Malzemelerde Bulunan Eğik Çatlakların Gerilme Şiddet Çarpanları Jk-İntegral Yöntemi ile Hesaplanması
(Fen Bilimleri Enstitüsü, 2012)
The main aim of this study is to utilize a Jk-integral for the analysis of inclined
cracks located in functionally graded materials (FGMs). The crack is subjected to
mixed mode thermal loading. The generalized definition ...
Designing Universal Yoke Structure of Suspension and Release System with Topology Optimization for Fighter Aircrafts
(Fen Bilimleri Enstitüsü, 2020)
In the aviation industry, a design with a sensitive and low margin is more important than any vehicle production. Within the scope of this study, the design road map of a product intended to be used in fighter aircraft is ...
Weight Optimization of An Aircraft Wing Composite Rıb Using Finite Element Method
(Fen Bilimleri Enstitüsü, 2020)
In present work, weight optimization and weight reduction of composite wing rib design which is one of the wing structural components used in aircraft wing design are studied. As a result of the optimization study on ...
Modeling of the Mechanical Behavior of Composites Showing Nonlinear Material Behavior Using the Embedded Element Method
(Fen Bilimleri Enstitüsü, 2020)
Composite materials are heterogeneous materials that are composed of two or more different materials. They are used in numerous applications, such as, automotive, aerospace, biomechanics application. Accurate and realistic ...
Sensitivity Analysis of Material Parameters on the Micro-Scale Stress Distribution in Fiber Reinforced Composites
(Fen Bilimleri Enstitüsü, 2023)
Knowing the mechanical behavior of fiber-reinforced composites are important since
unidirectional (UD) composite materials have been widely used in many industries.
Different methods in macro-scale and micro-scale have ...
Fınıte Element Method Correlatıon Of Damage Tolerance Tests For Composıte Sandwıch Structures
(Fen Bilimleri Enstitüsü, 2022-12-20)
In this study, damage tolerance and impact responses of a sandwich composite aircraft radome (radar dome) were determined numerically and experimentally at different energy levels. The sandwich composite was composed of ...
