Search
Now showing items 1-10 of 150
Determination of Stress Vs. Temperature Phase Diagram Of Niti Shape Memory Alloys With Different Porosity Levels
(Fen Bilimleri Enstitüsü, 2018)
Having many superior properties compared to conventional materials, shape memory alloys (SMAs) have been studied and used in many engineering applications over the last four decades. As one of the commonly used SMAs, NiTi ...
Askeri Araç Ön Far Sistemi Opto-Mekanik Tasarım Ve Analizi
(Fen Bilimleri Enstitüsü, 2018-07-09)
In this thesis, it is aimed to opto-mechanical design of a military vehicle headlight
system that provides illumination with high efficiency solid-state leds and perform
thermal and structural analysis with finite element ...
A Compliant Suspension Application to a Small Scale Car
(Fen Bilimleri Enstitüsü, 2019)
Compatibility of a compliant equivalent for a double wishbone suspension is assessed in this thesis. Reference rigid double wishbone suspension is taken from a small-scale model car. Rear left suspension of this model car ...
İç İçe Geçmiş Silindirik, Yüksek Basınç Altında Çalışabilen, Yüksek Sızdırmazlığa Sahip Titanyum Tüpün, Elektron Işın Kaynağı Yöntemi Kullanılarak Deneysel Kaynak Parametre Karakterizasyon Çalışması İle Elde Edilmesi
(Fen Bilimleri Enstitüsü, 2019-05)
Around the world, the defence industry is of great importance due to continuous and changing diplomatic balances. The importance of the industry is increasing day by day. At this point, air defence missile systems are one ...
Estimation Of Stress Intensity Factors For Cracked Finite Plates Using A Hybrid Model Of Artificial Neural Network And Finite Element Method (Ansys)
(Fen Bilimleri Enstitüsü, 2019)
The aim of this study was to develop an artificial neural network model in order to estimate stress intensity factor values of two different types of semi elliptical surface cracked plates which have no explicit stress ...
Uçak Elektronik Sistemi Soğutma Pompasının Sonlu Elemanlar Yöntemi Kullanılarak Mekanik Tasarımı
(Fen Bilimleri Enstitüsü, 2018-05)
In this thesis study, it is aimed to investigate the mechanical design and structural analysis of the cooling pump which is going to be used in the aerospace industry. As this product is intended to be used in the aerospace ...
Modelling of Non-Linear Effect in Remote Controlled Stabilized Gun Systems
(Fen Bilimleri Enstitüsü, 2018-06-01)
The defense industry is the fastest growing sector with technological developments all over
the world. Autonomous and remote controlled weapons are regarded the most advanced
weapons in today’s battlefields. In this ...
IQ-BIKE: Çevreci, Sağlıklı, Enerji Maliyeti Düşük, Paralel Hibrit, Yenilikçi Bir Şehir İçi Ulaşım Aracı
(Fen Bilimleri Enstitüsü, 2018)
Due to the increase in the world-wide rate of obesity and the workforce that urbanization brings, people don’t move enough and the sporting activities are minimized. Bicycling is not preferred by many because it is a more ...
Fin Optimization In A Flow Field Induced By Piezoelectric Fan
(Fen Bilimleri Enstitüsü, 2018)
In recent years, piezoelectric fans have been investigated for forced convection heat transfer applications as an alternative to conventional fans. Basically, it consists of a piezoelectric and a non-piezoelectric patch. ...
Mobil Platform Sabitlendirici Ayaklarının Statik, Dinamik Ve Yorulma Analizlerinin Sonlu Elemanlar Simülasyonu
(Fen Bilimleri Enstitüsü, 2017)
Stabilizer legs in mobile platforms are being used in many different fields. They take
two tasks at the same time; load carrying and mobile platform immobilization when
needed. In transport industry, they fix the elevator ...