Search
Now showing items 1-10 of 66
Determination of Stress Vs. Temperature Phase Diagram Of Niti Shape Memory Alloys With Different Porosity Levels
(Fen Bilimleri Enstitüsü, 2018)
Having many superior properties compared to conventional materials, shape memory alloys (SMAs) have been studied and used in many engineering applications over the last four decades. As one of the commonly used SMAs, NiTi ...
Askeri Araç Ön Far Sistemi Opto-Mekanik Tasarım Ve Analizi
(Fen Bilimleri Enstitüsü, 2018-07-09)
In this thesis, it is aimed to opto-mechanical design of a military vehicle headlight
system that provides illumination with high efficiency solid-state leds and perform
thermal and structural analysis with finite element ...
A Compliant Suspension Application to a Small Scale Car
(Fen Bilimleri Enstitüsü, 2019)
Compatibility of a compliant equivalent for a double wishbone suspension is assessed in this thesis. Reference rigid double wishbone suspension is taken from a small-scale model car. Rear left suspension of this model car ...
İç İçe Geçmiş Silindirik, Yüksek Basınç Altında Çalışabilen, Yüksek Sızdırmazlığa Sahip Titanyum Tüpün, Elektron Işın Kaynağı Yöntemi Kullanılarak Deneysel Kaynak Parametre Karakterizasyon Çalışması İle Elde Edilmesi
(Fen Bilimleri Enstitüsü, 2019-05)
Around the world, the defence industry is of great importance due to continuous and changing diplomatic balances. The importance of the industry is increasing day by day. At this point, air defence missile systems are one ...
Estimation Of Stress Intensity Factors For Cracked Finite Plates Using A Hybrid Model Of Artificial Neural Network And Finite Element Method (Ansys)
(Fen Bilimleri Enstitüsü, 2019)
The aim of this study was to develop an artificial neural network model in order to estimate stress intensity factor values of two different types of semi elliptical surface cracked plates which have no explicit stress ...
Uçak Elektronik Sistemi Soğutma Pompasının Sonlu Elemanlar Yöntemi Kullanılarak Mekanik Tasarımı
(Fen Bilimleri Enstitüsü, 2018-05)
In this thesis study, it is aimed to investigate the mechanical design and structural analysis of the cooling pump which is going to be used in the aerospace industry. As this product is intended to be used in the aerospace ...
Modelling of Non-Linear Effect in Remote Controlled Stabilized Gun Systems
(Fen Bilimleri Enstitüsü, 2018-06-01)
The defense industry is the fastest growing sector with technological developments all over
the world. Autonomous and remote controlled weapons are regarded the most advanced
weapons in today’s battlefields. In this ...
Fin Optimization In A Flow Field Induced By Piezoelectric Fan
(Fen Bilimleri Enstitüsü, 2018)
In recent years, piezoelectric fans have been investigated for forced convection heat transfer applications as an alternative to conventional fans. Basically, it consists of a piezoelectric and a non-piezoelectric patch. ...
Niti Şekil Bellekli Alaşımların Süperelastik Özelliklerinin Termo-Mekanik İşlemlerle İyileştirilmesi
(Fen Bilimleri Enstitüsü, 2015)
Nickel-rich (%50.7.at.) Nickel-Titanium Shape Memory Alloys which were commercially obtained from two different suppliers have been subjected to thermo-mechanical processing for one hour via aging under stress at 450°C ...
Merkezi Diferansiyelin Çoklu Model Geçişiyle Aktif Kontrolü
(Fen Bilimleri Enstitüsü, 2014)
In this thesis, the active differential working based on the principle of the torque transfer is dealt to build up an alternative to the other standardized active control systems working based on the principle of the braking ...