Protetik Diş Tedavisi Bölümü
Bu bölümdeki koleksiyonlar
Güncel Gönderiler
-
HEX VE NON-HEX TİTANYUM TABAN DAYANAKLAR ÜZERİNE ÜRETİLEN ÇOK ÜNİTELİ MONOLİTİK ZİRKON KÖPRÜLERDE KUVVET DAĞILIMININ SONLU ELEMANLAR STRES ANALİZİ İLE KARŞILAŞTIRILMASI
(Sağlık Bilimleri Enstitüsü, 2022)SAKAR D., Comparison of Force Distribution with Finite Element Stress Analysis in Multi-Unit Monolithic Zircon Bridges Fabricated on Hex and Non-hex Titanium-Base Abutment. Hacettepe Üniversitesi, Diş Hekimliği Fakültesi, ... -
Üç Farklı Pembe Kompozitin Makaslama Bağlanma Dayanımına Titanyum, Zirkonya, Modifiye PEEK Alt Yapının ve Termal Yaşlandırmanın Etkisi
(Sağlık Bilimleri Enstitüsü, 2024-01-18)The aim of the study is to evaluate the effect of different framework materials currently used in fixed restorations and thermal aging on the shear bond strength of gingiva colored composite materials used to provide pink ... -
Temizleme Yöntemlerinin Tükürük ile Kontamine Yüksek Translüsens Zirkonyanın Bağlanma Dayanımına Etkisi
(Sağlık Bilimleri Enstitüsü, 2022)CENGİZ A.K., The effect of cleaning methods on the bond strength of saliva contaminated high translucent zirconia. Hacettepe University, Faculty of Dentistry, Thesis in Prosthodontics, Ankara, 2022. The aim of this in ... -
TAM KRON PREPARASYONUNDA BİTİŞ SINIRI VE YÜZEY GEOMETRİSİNİN DİJİTAL ÖLÇÜ HASSASİYETİNE ETKİSİ: İN VİTRO ÇALIŞMA
(Sağlık Bilimleri Enstitüsü, 2022)GÜNEL A, The effect of finish line and surface geometry on digital impression accuracy in full crown preparation: An in vitro study. Hacettepe University Faculty of Dentistry, Thesis in Prosthodontics, Ankara, 2022 Different ... -
İMPLANT ÜSTÜ DİJİTAL ÖLÇÜLERDE TARAMA GÖVDELERİNDE YAPILAN MODİFİKASYONUN DİJİTAL ÖLÇÜ HASSASİYETİNE ETKİSİ: IN VITRO ÇALIŞMA
(Sağlık Bilimleri Enstitüsü, 2022)UZEL S.M., The Effect of Scanbody modifications on Digital Impressions on Implants on Digital Impression Accuracy: In Vitro Study. Hacettepe University, Faculty of Dentistry, Thesis in Prosthodontics , Ankara, 2022. There ... -
İmplant Destekli Sabit Protez Yapımında Direkt Dijital Ölçü İçin Kullanılan Farklı Tarama Postlarının Hassasiyetinin Değerlendirilmesi: Metodolojik Klinik Çalışma
(Sağlık Bilimleri Enstitüsü, 2022)Information with regards to effects of implant scanbody and its CAD library used in digital workflow in fabrication of implant supported restoration is not clinically evidence based. The purpose of this study was to evaluate ... -
FARKLI ÜRETİM TEKNİKLERİYLE ÜRETİLEN PROTEZ KAİDE MATERYALLERİNDEN SALINAN REZİDÜEL MONOMER MİKTARININ KARŞILAŞTIRILMASI
(Sağlık Bilimleri Enstitüsü, 2022)TEZCAN M. Comparison of the Amount of Residual Monomer Released from Denture Base Produced with Different Production Techniques Hacettepe University, Faculty of Dentistry, Thesis in Prosthodontics, Ankara, 2022. The use ... -
Tam Ark Restorasyonlarda Yardımcı Geometrik Parça Kullanımının Dijital Ölçü Hassasiyetine Etkisi: In Vitro Çalışma
(Sağlık Bilimleri Enstitüsü, 2021)The use of digital impression is increasing day by day in the production of implant supported prostheses. However, conflicting results were reported when there are wide toothless areas between implants. The aim of this ... -
Üç Boyutlu Yazıcıyla Üretilmiş Total Protez Kaide Materyalinde Yapılan Farklı Yüzey İşlemlerinin Renk Stabilitesine Etkisi
(Sağlık Bilimleri Enstitüsü, 2021-08-11)DOYMUŞ Y. Ş., The effect of different surface treatments on the color stability of the total denture base material produced with a three-dimensional printer. Hacettepe University, Faculty of Dentistry, Thesis in Prosthodontics, ... -
Gingival Porselenlerin Renk Değişiminin ve Yüzey Özelliklerinin in Vitro Olarak Değerlendirilmesi
(Sosyal Bilimler Enstitüsü, 2021)The aim of this in vitro study was to evaluate the effect of thermocycling on the color stability, translucency and surface roughness of two different gingival porcelain materials. Two gingival porcelains IPS e.max® Ceram ... -
Farklı CAD/CAM Seramik Materyallerin Yüzey Özellikleri ve Renklenmelerinin In-vitro İncelenmesi
(Sağlık Bilimleri Enstitüsü, 2021-06-07)This in-vitro study aims to evaluate the surface roughness and coloration of four different CAD/CAM ceramic materials applied with different finishing and polishing sets. In this study, the surface roughness of IPS e. Max ... -
Aşırı Madde Kaybı Olan Kanal Tedavili Dişlerde Endokron ve Tam Porselen Kron Restorasyonlarının Etkililiğinin Prospektif Olarak Değerlendirilmesi
(Sağlık Bilimleri Enstitüsü, 2021-05-23)Traditional treatment approach for severly damaged endodontically treated teeth, is post-core and crown restorations. The purpose of this study is to evaluate the success of endocrown restorations in endodontically treated ... -
Ekstraoral İmplantlarda Yeni Anti-Manyetik Dayanak Tasarımının Tutuculuğa Etkisinin İn-Vitro İncelenmesi
(Sağlık Bilimleri Enstitüsü, 2021)Magnet attachments are widely used in maxillofacial prostheses. In addition to many advantages of magnet attachments, there are also disadvantages such as the need to remove the magnetic abutments during the magnetic ... -
CAD-CAM Tam Seramik Materyallerin Renk, Translusensi ve Pürüzlülükleri Üzerine Polisaj ve Glaze Işlemlerinin Etkisinin Değerlendirilmesi
(Sağlık Bilimleri Enstitüsü, 2020)Kamaci Ergül S., Evaluation of the Effect of Polishing and Glaze Techniques on the Color, Translucency and Surface Roughness of CAD-CAM AllCeramic Materials, Hacettepe University Faculty of Dentistry, Prosthetic Dentistry ... -
Farklı Ölçü Yöntemlerinin Maksiller Tam Protezlerin Tutuculuklarına Etkisinin Kalitatif ve Kantitatif Olarak Değerlendirilmesi
(Sağlık Bilimleri Enstitüsü, 2020)YORUKOGLU İ, Effect of impression technique aplied for maxillary complete dentures on retention: Qualitative and quantitative evaluation. Hacettepe University Faculty of Dentistry, Thesis in Prosthodontics, Ankara, 2020. ... -
Direkt ve İndirekt Dijitalizasyon ile Üretilen 5 Üyeli Monolitik Zirkonya Restorasyonların Marjinal ve İnternal Uyumunun 3 Boyutlu Karşılaştırması: İn Vitro Çalışma
(Sağlık Bilimleri Enstitüsü, 2020-06)ULUÇ İ.G, Comparison of marginal and internal fit of 5-unit monolithic zirconia fixed dental prostheses made with direct and indirect digitalization: An in vitro study. Hacettepe University Faculty of Dentistry, Thesis in ... -
Temporomandibular Eklem İçi Rahatsızlığı Olan Hastalarda Klinik Teşhis ve Bulguların MR Görüntüleme Sonuçları ile Karşılaştırılması
(Sağlık Bilimleri Enstitüsü, 2020)Yumuşakbaş E. Comparisson of Clinical Symptoms and MRI Findings in Patients with Temporomandibular Joint Disorders, Hacettepe University Faculty of Dentistry Deparment of Prosthodontics, Specialization Thesis, Ankara, 2020. ... -
Do Resin Cements Alter Action Potentials Of Isolated Rat Sciatic Nerve?
(2011)Objectives: The purpose of this study was to explore the effects dual-cure resin cements on nerve conduction. Methods: Panavia F, RelyX ARC, and Variolink II polymerized either by light-emitting diode (LED) or quartz ... -
Dislodgement Resistance Of Zirconia Copings Cemented Onto Zirconia And Titanium Abutments
(Lippincott Williams & Wilkins, 2017)Purpose: To determine the effect of the cement type and abutment material on the tensile strength required to dislodge zirconia copings. Materials and Methods: Two experimental groups of abutments were prepared: (1) titanium ... -
Correlation Between Microleakage And Screw Loosening At Implant-Abutment Connection
(2014)PURPOSE This study aimed to evaluate the correlation between microleakage and screw loosening at different types of implant-abutment connections and/or geometries measuring the torque values before and after the leakage ...