Basit öğe kaydını göster

dc.contributor.advisorArıtan, Serdartr_TR
dc.contributor.authorAmca, Arif Mithattr_TR
dc.date.accessioned2015-10-15T09:36:37Z
dc.date.available2015-10-15T09:36:37Z
dc.date.issued2014tr_TR
dc.identifier.urihttp://hdl.handle.net/11655/2896
dc.description.abstractThe aims of this study were to analyze the effects of grip techniques, hold depth and hold inclination on maximal finger force capacity (MFFC) and muscle fatigue in order to develop a hold difficulty model related to these parameters. For these purposes, three consecutive studies were conducted. In the first study, the relationship between hold depth, grip technique and MFFC were examined and it was concluded that MFFC falls with the decrease in hold depth. In the second study, the effects of hold depth on intermittent finger force endurance were examined and it was seen that there is an excessive and sharp decline on 1 cm depth hold. In the third study, the effects of hold surface inclination on MFFC were analysed on various depths of holds. The results showed that MFFC decreases with the increase in the hold surface inclination and this decline is more notable on narrow holds. The results of all these three studies were combined and a hold difficulty model was created.tr_TR
dc.language.isoturtr_TR
dc.publisherSağlık Bilimleri Enstitüsütr_TR
dc.subjectModellingtr_TR
dc.titleKaya Tırmanışında Tutamak Yapılarına Göre Tutuş Zorluk Derecelerinin Modellenmesitr_TR
dc.typeinfo:eu-repo/semantics/doctoralThesistr_TR
dc.callno2014/1724tr_TR
dc.contributor.departmentoldEgzersiz ve Spor Bilimleri Bölümütr_TR
dc.description.ozetBu çalışmada, farklı tutuş teknikleri, tutamak derinlikleri ve tutamak yüzey açılarında tırmanıcıların uygulayabildikleri maksimal parmak kuvveti kapasiteleri ve yorgunluk ilişkileri incelenerek tutamaklar ve tutuşlar için bu değişkenlere bağlı bir zorluk fonksiyonu ve modeli oluşturulması amaçlanmıştır. Bu bağlamda birbirini takip eden üç farklı çalışma yapılmıştır. İlk çalışmada, tutamak derinliği ve tutuş tekniklerinin maksimal parmak kuvvet kapasitesi (MPKK) üzerindeki etkileri araştırılmış ve derinliğin azalması ile MPKK nın azaldığı bulunmuştur. İkinci çalışmada tutamak derinliği ile tekrarlı izometrik parmak kuvveti dayanıklılığı arasındaki ilişki incelenmiştir. Derinliği 1 cm olan tutamakta kuvvet kapasitesinde daha fazla ve keskin düşüş olduğu görülmüştür. Üçüncü çalışmada, hem tutamak derinliği hem de yüzey açısı değiştirilerek MPKK incelenmiştir. Oluşturulan MPKK kestirim fonksiyonları ile tutamak tutuş zorluğununun tanımlanmasında yeni modeller önerilmiştir.tr_TR


Bu öğenin dosyaları:

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster